Tesla on Autopilot accelerated, didn't brake ahead of fatal crash



Associated Press

A Tesla SUV using the company's semi-autonomous Autopilot driving system accelerated just before crashing into a California freeway barrier, killing its driver, federal investigators have determined.

In this March 23, 2018, file photo provided by KTVU, emergency personnel work at the scene where a Tesla electric SUV crashed into a barrier on US Highway 101 in Mountain View, Calif.

Source: Associated Press

The National Transportation Safety Board, in a preliminary report on the March 23 crash, also said that data shows the Model X SUV did not brake or try to steer around the barrier in the three seconds before the crash in Silicon Valley. The NTSB says it now will examine the cause of the crash.

Tesla wouldn't say if the system performed as designed. A spokeswoman referred to a company blog saying that a Tesla with Autopilot is far safer than vehicles without it. The blog says Autopilot does not prevent all crashes but makes them less likely.

The crash on US 101 killed the driver, Walter Huang, 38, an Apple software engineer.

In the report released Thursday, the NTSB said the SUV was operating with traffic-aware cruise control and auto-steer lane-keeping assistance engaged at the time of the crash. The cruise control maintains a set distance between the cars and traffic in front of them.

The SUV also was equipped with automatic emergency braking, which is always on in Tesla vehicles unless customers deactivate it by taking several steps on the vehicle touch screen.

According to the report, during the 60 seconds before the crash, Huang's hands were detected on the steering wheel three times for a total of 34 seconds. But for the last six seconds, hands were not detected on the steering wheel.

Eight seconds before the crash, the SUV was following a vehicle and travelling about 65 mp/h. A second later, the SUV began a "left steering movement" while still following the other vehicle. Four seconds before the crash the Tesla wasn't following a vehicle any more.

A second later it accelerated from 62 mph to 70.8 mp/h "with no pre-crash braking or evasive steering movement detected," the report said.

When the SUV moved to the left, it entered a triangular "gore area" that is marked with white lines and divides the freeway lanes from an exit ramp. Then it hit the barrier, which was equipped with an accordion-like device to absorb impact in a crash.

But that device had been damaged in a previous crash on March 12.

It likely will take more than a year to determine what caused the crash, NTSB spokesman Christopher O'Neil said today. Among other factors, investigators are trying to determine how the car's camera, radar and ultrasonic sensors were working and what they were tracking.

"The focus isn't Tesla's technology," he said. "The focus is on what led to this crash and how do we prevent it from happening again."

A photo released by the South Jordan Police Department shows a traffic collision involving a Tesla Model S sedan with a Fire Department mechanic truck.

A photo released by the South Jordan Police Department shows a traffic collision involving a Tesla Model S sedan with a Fire Department mechanic truck.

Source: Associated Press

Tesla's system may have a problem spotting or stopping for stationary objects. Federal agencies are investigating two other crashes in which Teslas ran into stopped fire department vehicles.

loading error